This mortise cup closet door pull is constructed of stamped steel and comes finished in brass. The outside diameter of this pull is 2 inch and it has a depth of 5/16 inch. These mortise cups set flush in the door and are used on by-passing closet panel doors to provide a pull for ease of opening and closing, and it they are used by many manufacturers. This item includes 2 pulls and 4 nails per package. Installation tip: to avoid damaging the pulls during installation; use a pair of needle nose pliers to hold the nails while hammering, then finish driving the nails with a nail set to seat them in place. Silicone glue may be required if the hole has worn larger.
REPLACE CLOSET DOOR PULL – Easily replace a damaged or missing closet door pull with Prime-Line’s round finger pull, the pull is constructed of stamped steel with a brass-plated finish.
UNIVERSAL DESIGN – Used by many closet door manufacturers on bi-pass door systems, the finger pull will match the existing hardware on closets throughout your home.
INSTALLATION – Installation is quick and easy with all hardware included (The door pulls fit a 2 inch mortise in the closet door, the pull is held in place by two small nails; when flush mounted, it is 2 inch in diameter)
FOR BYPASS WARDROBE DOORS – The stamped steel closet pull is compatible with bi-pass wardrobe doors 3/4 inch to 1-3/4 inch thick
NOTE – Please refer to the line art drawing for dimensions and compare with your original item before purchasing (Not Universal)